Smart Life App Setup Guide

Smart Life App Setup Guide

The EVPOVO smart EV chargers support app control through the Smart Life app. The app can be used to start or stop charging, schedule charging sessions, monitor charging data, and view charging history.

App control is optional. The charger can still be used for normal charging without connecting to the app.

The Smart Life app is free to download. The developer name may appear as Volcano Technology Co., Ltd. in the App Store or Google Play.

Before setup, please make sure:

• Your phone is connected to a 2.4 GHz WiFi network
• Bluetooth is enabled on your phone
• The charger is powered on
• Your phone is close to the charger
• The WiFi password is correct
• The garage or installation area has a stable WiFi signal

Important WiFi Note

EVPOVO smart chargers support 2.4 GHz WiFi. A 5 GHz-only network is not supported.

If your router uses the same name for both 2.4 GHz and 5 GHz networks, pairing may fail on some routers. We recommend using a separate 2.4 GHz WiFi name for setup.

If the WiFi signal in your garage is weak, you can use a phone hotspot that supports 2.4 GHz for the first pairing. After setup, nearby control can also be done through Bluetooth.

Bluetooth control range: approximately 15 meters / 49 feet, depending on the environment.

Basic Setup Steps

1. Download the Smart Life app from the App Store or Google Play.
2. Log in or create a Smart Life account.
3. Turn on Bluetooth and connect your phone to 2.4 GHz WiFi.
4. Power on the charger.
5. Open the Smart Life app and add the charger.
6. Follow the in-app instructions to complete pairing.

Setup Video

Please watch the video below for the app pairing process.

Note: App setup is optional. The charger can still charge normally without app connection.

If pairing fails, please try:

• Move your phone closer to the charger
• Confirm you are using 2.4 GHz WiFi
• Check the WiFi signal in your garage
• Make sure the WiFi password is correct
• Disable VPN during setup
• Restart the charger and router

You can also reset the charger and pair again:

Press and hold the “A” button and the Timer / Clock button for more than 3 seconds to restore factory settings. Then restart the pairing process.

Need Help?

Please contact us with your order number, product model, phone model, router model, and a short video showing the setup issue.

Contact: support@evpovo.com